Raymarine Rudder Dokumentacja Pobierz pdf (Strona 26)

16 ST60+ Rudder Angle Indicator Instrument Owner’s Handbook

2. Ensure that:

• The panel on which you intend to mount the instrument is between

0.12 in (3 mm) and 0.78 in (20 mm) thickness.

• The selected location is clean, smooth and flat.

• There is sufficient space behind the location to accommodate the rear of

the instrument and connectors.

3. Apply the flush mount template (supplied at the rear of this handbook) to the

selected location and mark out the aperture into which the assembled instru-

ment and bezel will sit.

4. Cut out the aperture (3) for the assembled instrument and bezel and remove

the template.

5. Peel off the protective sheet from the self-adhesive gasket (4) then stick the

gasket into position on the rear of the bezel.

6. Screw the two fixing studs (1) into the threaded sockets on the rear of the

instrument.

7. Mount the assembled instrument, studs, bezel and gasket into the panel.

8. Locate the flush mount bracket (6) onto the fixing studs and secure the assem-

bly to the panel with the thumb-nuts (5).

Bracket mounting

A Control Unit Mounting Bracket (Part No. E25009) enables you to mount your

ST60+ instrument in locations where other forms of mounting are impractical.

Although bracket mounting provides a useful alternative method for securing

your instrument, it is only suitable for use in positions where the instrument will

not be exposed to water.

To bracket mount your ST60+ instrument, do so in accordance with the Control

Unit Mounting Bracket Instruction Sheet.

Fitting transducers

The Rudder Reference Transducer duplicates movement of the tiller arm to

provide the instrument or the autopilot as appropriate, with the exact position of

the vessel’s rudder.

Rotary and Linear Rudder Reference Transducers are available. The Rotary type is

suitable for most installations, but the Linear type is designed for use with

‘bullhorn’ type outboard installations. Refer to the fitting instructions for either

the

Rotary Rudder Reference Transducer

or the

Linear Rudder Reference

Transducer

, as appropriate.

81266_1.book Page 16 Monday, December 5, 2005 9:28 AM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Brak uwag

Raymarine Rudder Dokumentacja Strona 26